VAS 5054A ODIS V2.0/V2.02 Bluetooth for VW Audi Skoda Seat (1996y-2013y) Vag Diagnostic Tool Multi-Languages
Top 5 Reasons to Get VAS 5054A:
VAS 5054A ODIS V2.0 Computer Windows System Requirements:
Windows System Language: American English
System C:// have to be NTFS format
C:// need to have at least 40GB space for installing VAS5054A
VAS 5054A ODIS System Core Features:
The GFF database guided by centralized management posts fault information and solution directly.
A full range of integration from developing to after sale service makes procedure basis reliable.
The integration of diagnostic system (eg : Elsa pro) further enhances the core processes of service.
Systematically optimizes technician’s diagnostic procedure and saves their time cost.
The optimization of diagnostic procedure makes the distributor’s cost reasonable.
VAS 5054A Specification:
The vehicle protocols are handled directly in the VAS 5054A.
This ensures fast response times and a reliable real-time behavior independently of the PC operating system. Every time a connection is established, the VAS 5054A software is identified with the version installed on the application PC. The VAS 5054A thus automatically adopts any new features provided after a new software version has been installed on the application PC.
The diagnostic application and the associated Diagnostic Base System are installed on the application PC.
The diagnostic base system can access the VAS 5054A via Bluetooth or USB.
Access Via Bluetooth: After a connection to the VAS 5054A has been set up, the Bluetooth software provides a virtual serial COM port (Bluetooth Serial Port Profile). The Diagnostic Base System uses this COM port to communicate with the VAS 5054A.You need to specify this port when you install the diagnostic application.
Access Via USB: You can also connect the VAS 5054A to the application PC by using the supplied USB cable. Windows detects the VAS 5054A through Plug and Play, and automatically installs the drivers copied when you installed the diagnostic application. Setup of the VAS 5054A is then complete and the device is ready for use by the diagnostic application.
The Following Vehicle Bus Systems are Supported:
K line (ISO9141-2)
High-speed CAN (ISO 11898-2)
Low-speed CAN (ISO 11898-3)
J1850 (SAE J1850)
Lexia-3 lexia3 V48 for Citroen/Peugeot Diagnostic PP2000 V25 XS Evolution with Diagbox V7.57 Software Support Peugeot 307
Top 7 Reasons to Get Lexia3 XS Evolution with Original Chip:
1. Update: By CD
2. Support Multi-Language: English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech
3. It works for both Citroen and Peugeot. Now support Peugeot 307!
4. Version: Lexia3 V48, PP2000 V25, Diagbox V7.57
5. Lexia-3 PCB edge is golden with original full chips.Double PCB has 7pcs optocouplers, which are 100% original and new.
6. lexia-3 relays are 12pcs, which are 4.5V, it is more stable.
7. PP2000 have 2pcs Optocouplers
Hardware and Software Requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed. If customer requires, we can prepare ready to work PC.
Please setup the software according to the requirements to hardware and software. Otherwise it will fail to setup and bring you much trouble.
Better to install the software on the computer with Windows XP system.
Better to close the Anti-virus software on your computer. Because the Anti-virus may recognize it as a type of virus, it will clear off all the software on the CD.
1.It is compatible with Citroen cars including: C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on. But please pay attention, according to our customer's experience, this item can not works good at C5 new models.
2.It is compatible with most Peugeot cars from 1995..If you have the two types of cars, please pay attention, please check with us first before purchase.
3.Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
2. Read Fault Codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3. Clear Fault Codes
this function clears all stored fault codes and other diagnostic information.
4. Auto-Scan (Complete Car Scan/Test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5. Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6. Actuator Test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
LEXIA-3/PP2000 Package List:
1pc x Main unit with extension OBD2 cable
1pc x Long 9pin to USB cable
1pc x Short 9pin to USB cable
1pc x OBD2 cable
1pc x Instruction for Installation and Activation DVD for PP2000
Lexia-3 Setup Instruction
PP2000 is the Software for Peugeot !
Click ‘InstPC’ to install
LEXIA3 is the Software for Citroen !
Click ‘Instlex3’ to install
Important Note: Please create a blank txt file named ‘version’ in C:\ before installation of LEXIA3
Otherwise it will display a warning as follow:
Lexia3 PP2000 Install Software:
Before installation, windows system needs to be English, and you cannot choose the language you want unless the language selection windows appear.
Lexia3 PP2000 Activate Software:
Under the file “LEXIA3_KEYGEN”, there are the activation pictures for lexia3 and the file “PP2000_KEYGEN” contains the activation pictures for PP2000 (PPS).
It needs registered code for PP2000 (PPS), but no registered code for lexia3, as for the registered code.
Lexia 3 PCB Board:
SBB key Programmer Release
Top 5 Reason To Get SBB:
1. Software Version: V33
2. Supported Languages: Italian/German/French/English/Spanish/Greek/Portuguese/Turkish/Russian
3. Supported Cars: Multi-brands
4. Used as a portable unit for programming keys in immobilizer units on vehicles.
5. Due to its integrated hardware, SBB needs no more than the OBDII cable provided to carry out a wide range of functions:programming new keys
1.reading keys from immobilizer's memory
2.deactivating keys no longer in the car owner's possession
3.operation by means of a menu guided programming
4.programming new remote controls
5.software with full database containing all the most important vehicle makes
SBB Package list:
1pc x SBB Main Unit
1pc x OBD II cable
1pc x AC adapter
1pc x CD with user manuals & updating software
Q1: Can SBB match Australia Ford Falcon and Holden Commodores?
A1: Yes, it can.
Q2: Why SBB do not have lots of connectors?
A2: This product can directly connect with the car's OBD2 16pin connector.
Q3: Can this new version be updated?
A3: The package will conclude with update information.
Q4: Which types of cars can this product programming?
A4: SBB is a univesal key programming tool. It can do lots of cars, but to detail car compatible list, there is a file on our website or you can contact our customer service.
SMOKE A1 Pro Turbo is designed for quick detecting the leakage of pipe systems on Motorcycle / Cars / SUVs / Truck, such as air intake system, exhaust system, manifold, coolant tank, sealing, and fuel pipe, etc, but not suitable for components sensitive to smoke, such as EVAP, pneumatic central lock system, lamp housing and cabin.
Compact Design, A1 Pro Turbo is the smallest Diagnostic Leak Detector in the world
Instant smoke generation
Super easy in operation, only a Start/Stop button.
Smart controlled 5 minutes working cycle
High pressure output
Quick Bladder that fits every intake and exhaust
DC 12V vehicle battery driven
Inbuilt air compressor
Optional Pressure Gauge
|Pressure: 10-12 Psi||Chemical Refill: 15ml|
|Smoke Flow: 5L/Min||Std. Pack: Main Unit, Intake Bladder, Plastic Carry Box|
|Power Supply: DC 12V Vehicle Battery||Unit Dim.: L9cm x W9cm x H18cm (without hanger)|
|Air Source: Inbuilt Air Compressor||Delivery Dim.: L34.5cm x W27cm x H14cm|
Block-off Cap x 1 set
Pressure Gauge x 1pcs
H.D.Bladder (8cm/3.2' - 20cm/7.9') x 2pcs
UV Detection Kit x 1pcs
8 Reasons for a Diagnostic Leak Detector
1. Your scan tools ONLY can do half of the work
Your scan tools help you acquire the knowledge about which sensor had got the sampled data out of range. But your scan tools won’t tell you the cause/reason of the fault, and where to find it. A Diagnostic Leak Detector will tell you WHERE the problem is, which caused the sensors to get wrong data.
2. Over 60% of the DTCs are pressure related
Sensors sample voltage, temperature and pressure, of all the DTCs that possibility generated, over 60% are pressure related, regardless it’s an air pressure DTC, or an oil pressure DTC. With a Diagnostic Leak Detector, these DTCs are much easier to erase.
3. Increase income per service
By finding more hidden problems in a vehicle and proving it to the vehicle owner necessity of extra service, a Diagnostic Leak Detector will help increase your income per service.
4. Helps reduce labor cost
A Diagnostic Leak Detector helps technicians to locate problems currently in short time, avoid possibility of wrong diagnosis of the vehicle.
5. Enhance capability of more service calls
By reducing your service time cost, a Diagnostic Leak Detector makes your workshop capable of more service calls.
6. Ease the pain of finding leaks
The vehicle driven in the workshop with engine running hot, which put technicians in a bad working condition, with a Diagnostic Leak Detector, technician don’t have to touch the hot surface, reduce possibility of getting hurt in work.
7. More professional in facing customers
Customers may feel sorry for you if you jump onto and off the car to find problems. A Diagnostic Leak Detector will make technician’s work more professional with convincing result.
8. Small investment, big turnout
A Diagnostic Leak Detector is affordable for all level of workshops, and the equipment will pay for itself back by a few jobs.
Best Mercedes Star Diagnosis New Mb Star C3 Pro V2015.12
Top 5 Reasons to Get Best Quality MB Star C3:
1. Latest Version: V2015.12
2. Multi-Language: English, French, Croatian, Italian, Japanese, Russian, Spanish, Czech, Danish, Dutch, Finish, Greek, Hungarian, Korean, Polish, Portuguese, Romanian, Swedish, Turkish, Chinese
3. New Feature: do both Mercedes trucks and new types of cars
Best Mb Star C3 Pro Description:
XP-STAR(Auto-Link Blue STAR) realizes all the functions of official factory BENZ Star2000: reading out and erasing trouble code; reading the real-time data of sensor and actuator; coding and programming. It applies the latest high-tech central gateway system of car model 221/211 and 203 with software version updated to October of 2006, can enter all the Benz cars, such as autobus truck, saloon car, sports car, smart car and so on.
Best Mb Star C3 Pro Features:
1.This version of MB STAR C3 can fit all computers,it is not only limited on IBM T30,provide great convenience to customers.It has one hard disk contain DAS and WIS system.
2.With a 7 meter RS232-RS485 cable,provide more convenience to garage when diagnose.
3.Every hard disk has it's special number,have self-test function.Just give us the self-test report and the number,we will find out what's the matter with this tool,avoid the shipping charge when this tool need fix.Great improvement!
Best Quality MB Star C3 Supported Vehicle List:
Passenger Car Support List:
A(176), A(169), A(168), B(246), B(245), CLC(117), C(204) C(203), C(202), 190(201), E(212), E(211), E(210), 124(124), S(222), S(221), S(220), S(140), S(126),
E(207), CLK(209), CLK(208), CLS(218), CLS(219), CL(216), CL(215), CL(140) SLK(172), SLK(171), SLK(170), SL(231), SL(230), SL(129), SL(107), SLS(197),
M(166), M(164), M(163), G(463), G(461), E(212), E(211), E(210), 124(124), S(222), S(221),S(220), S(140), CLK(209), CLK(208), CLS(218), CLS(219), CL(216),
CL(215), CL(140), SLK(172), SL(231), SL(230), SL(129), SL(107),SLS(197), M(166), M(164), M(163), G(460), GL(164), GLK(204), R(251)
Van Support List:
MB 100(631), T1, SprinterIII, SprinterII, SprinterI, Sprinter900, Citan, Vito(639), Vito(638), V(638), Viano(639), T2, Vario, Vaneo(414)
Truck Support List:
Actros963/4, Actros2,3, AtegoIII, AtegoII, AxorII, Eonic, Zetros, Actros, Atego Light, Atego Heavey, HPN M96, Atron, HPN M2000, SKL, FSK, Further model series
Unimog Support List:
U20, UGN, UHN
Bus Support List:
TRAVEGO, INTOURO, INTEGRO, CITARO, CAPACITY, CITO, TOURISMO, O350/O403, CONECTO, O404, O405-O408, Minibus, OC500, TOURO, TOURINO, MBC, MULITEGO, O500, O500/OH, OH, OH368, OF, OF384, LO, O400, FURTHER MODEL SERIES
Super Sports Car Support List:
Best Mb Star C3 Pro Functions:
1.1989~up to now Car, Bus, Truck, Sprint, Smart ;
2.All electric system Diagnostic(Do not include flash code)
3.reading trouble code
4.erasing trouble code
10.component location diagram
Best Mb Star C3 Pro Specification:
1.Product Software Includes:
1)D-A-S: the automatically Diagnosis Assistance System ,Concise interface and straightforward operation with IBM high-quality computer can realize the quick and accurate code reading and the whole car system testing
2)W-I-S net: Workshop Information System Supply the whole view of the wiring diagram in a car,component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.
3)EPC.net : Electronic Parts Catalog
4)ST Finder:Part location finder
5)STAR Utilities : the movement management system and self-test
6)Xentry: New software released by Benz Company after 04/2009by diagnosis new cars.
Benz Original Anti- Theft
Keyzess Go System
Best Mb Star C3 Pro Package List:
1 x MULTIPLEXER
1 x 16Pin OBD II cable
1 x 4Pin Cable
1 x 38Pin Cable
1 x 14Pin Truck Cable
1 xRS232 to RS485 Cable
1 x Hard Disk
Best Mb Star C3 Pro FAQ
Q: What is the difference between the new mb star and old mb star c3?
A: New mb star c3 can do benz truck very well, solve the problem that can not do benz truck for the old mb star c3. And it also can do new types benz cars.The software is 03/2015 version, with software including the pacakge of new mb star c3. But the software for old mb star c3 is 11/2013 or 01/2010,if you want the newest software,you need to buy it from our website alone.
Difference among MB Star C3/C4, MB SD Connect Compact C4 and Super MB Star C3:
|Item Name||Ordinary Star C3||Red Star C3||Best MB Star C3||MB Star C4||MB SD C4||Super MB Star C3|
|Original||NO||NO||NO||NO||NO||HDD is original|
|Update||Update via HDD||Update via HDD||Update via HDD||Update via HDD||Update via HDD||Update Online
One Year for Free
|Hard Disk||External HDD,
Dell D630 HDD
Dell D630 HDD
Dell D630 HDD
Dell D630 HDD
Dell D630 HDD
Dell D630 HDD
|12V Cars Only||Cars & Trucks||Cars & Trucks||Cars & Trucks||Cars & Trucks||Cars & Trucks|
|Connection||Cable Connection||Cable Connection||Cable Connection||Cable Connection||Lan Cable and
|Protocols||K-Line, CAN Bus||K-Line, CAN Bus||K-Line, CAN Bus||K-Line, CAN Bus||K-Line, CAN Bus,
|K-Line, CAN Bus